User's Manual

OUTPOST Wireless Callbox Basic Operation
Have questions? Call 800-USA-1-USA (800-872-1872) or visit our website at www.ritron.com
3
LICENSE REQUIRED
FCC Licensing
The FCC requires the owners of the radios to obtain a
station license before using them.
The station licensee is responsible for ensuring that
transmitter power, frequency and deviation are within
the limits specified by the station license. The station
licensee is also responsible for proper operation and
maintenance of the radio equipment. This includes
checking the transmitter frequency and deviation peri-
odically, using appropriate methods.
To get an FCC license for VHF or UHF frequencies,
submit FCC application Form 600 as indicated in the
block at right. Your Ritron dealer can help you with this
process.
How to Obtain an FCC Radio License
Because your Ritron radio operates on Private Land
Mobile frequencies, it is subject to the Rules and
Regulations of the FCC, which requires all operators
of these frequencies to obtain a station license before
operating their equipment. Make application for your
FCC license on FCC Forms 600 and 159.
To have forms and instructions faxed to you by the
FCC, call the FCC Fax-On-Demand system at
202-
418-0177
from your fax machine; request Document
000600 & Form 159.
To have Document 000600 & Form 159 mailed to you,
call the FCC Forms Hotline at
800-418-FORM (800-
418-3676).
For help with questions concerning the license appli-
cation, contact the FCC at
888-CALL-FCC (888-225-
5322).
You must decide which radio frequency(ies) you can
operate on before filling out your application.
For help determining your frequencies, call Ritron at
800-USA-1-USA (800-872-1872).
Safety Standards
The FCC (with its action in General Docket 79-144, March 13,
1985) has adopted a safety standard for human exposure to
radio frequency electromagnetic energy emitted by FCC
regulated equipment. Ritron observes these guidelines and
recommends that you do also:
• DO NOT hold the radio so that the antenna is very close to
or touching exposed parts of the body, especially the face
or eyes, while transmitting. Keep the radio vertical, four
inches away while talking into the front panel.
• DO NOT press the Push-To-Talk except when you intend
to transmit.
• DO NOT operate radio equipment near electrical blasting
caps or in an explosive atmosphere.
• DO NOT allow children to play with any radio equipment
that contains a transmitting device.
• Repair of Ritron products should be performed only by Ri-
tron authorized personnel.
INDUSTRY CANADA Regulations
Industry Canada requires the owners of the radios to
obtain a radio license before using them.
An application form for your Industry Canada license
is included with your radio. Additional application
forms can be obtained from the nearest Industry Can-
ada District office. A list of these offices is included for
your information.
INDUSTRY CANADA License Application
1. Fill in the items per the instructions. If you need
additional space for any item, use the reverse side
of the application.
2. Use a typewriter or print legibly.
3. Make a copy for your files.
4. Prepare a check or money order to “Receiver
General for Canada”, for the amount listed on the
following schedule for each radio purchased. (Li-
censes are renewed annually on April 1st. Refer to
the following schedule for application fees for each
month.)
5. Mail the completed application, along with your
check or money order, to the closest Industry Can-
ada District Office.
Month of Initial Month of Initial
Application Fee Application Fee
April........................... $52 October.................... $33
May........................... $50 November ............... $29
June.......................... $46 December............... $26
July............................ $43 January.................... $23
August...................... $40 February .................. $20
September .............. $36 March ....................... $16
Notes: Fees are subject to change without notice.
The annual renewal fee is $41
Service
Federal law prohibits you from making any internal
adjustments to the transmitter, and/ or from changing
transmit frequencies unless you are specifically desig-
nated by the licensee.
If your radio equipment fails to operate properly, or
you wish to have the radio programmed, contact your
authorized dealer or Ritron.
U.S. Manufacturer: Canadian Represent
ative:
RITRON, INC. Lenbrook Communications
Repair Department 633 Granite Court
505 West Carmel Drive Pickering, ON L1W 3K1
Carmel, IN 46032 USA
Phone: [phone] Phone: [phone]
FAX: [phone] FAX: [phone]