User's Manual

ITEMS INCLUDED
WITH EACH RADIO
RSM-6X
RHD-15X
BC-6PT
Li-Ion Battery
w/ Belt Clip
ACCESSORIES Part No.
Nylon Carry Holster NH-PT
Ear Loop with PTT
RHD-15X
& Microphone
Speaker Microphone RSM-6X
Replacement, Battery Pack BP-Li-PT
Replacement, Belt Clip CB-PT
Optional 6-unit Gang Charger BC-6PT
Installing Audio Accessories
1. Remove the 1 phillips head fastener that
secures the audio accessory dust cover
to the radio.
2. Attach the Ritron audio accessory connector
to the radio using the 2 captive screws in the
audio accessory connector.
3. Do NOT over-tighten or use excessive
force when securing the mounting screws
to the radio
Battery Installation/Removal
1. Turn the radio OFF.
2. Align tabs at bottom of battery pack with the
slots at the bottom of the radio body.
3. Pivot the top of the battery towards the
radio body until you hear the spring latches
engage with a click.
To Remove
1. Turn radio OFF.
2. Slide both side latches down until they release.
3. Gently rotate the top of the battery pack away
from the radio.
VHF
Antenna
1. 2.
*Standard antenna supplied is cut for operation in the 150-165MHz frequency range
Model Description
PT-150M VHF, *151-154MHz, 8 Channels, 2 Watts
The Multi-Use Radio Service (MURS) is in the VHF,
151-154 MHz spectrum range. Transmit power is
limited to 2 Watts.
The Multi-Use Radio Service (MURS) is licensed by
rule. This means an individual license is not required
to operate a MURS device. You can operate a MURS
device regardless of your age and for personal or
business use so long as you are not a representative
of a foreign government. The FCC service rules for
the Multi-Use Radio Service (MURS) are located at
“http://www.fcc.gov/encyclopedia/rules-regulations-
title-47” \o “47 C.F.R. Part 95” 47 C.F.R. Part 95.
Factory Default Frequency Settings
The radio is factory programmed with all of the MURS
frequencies as shown below. See page 5 for Program-
mable Function Buttons default settings. The radio
channel settings and other features can be recongured
with PC programming software and special cable.
The radio can only be programmed for operation
on VHF MURS frequencies.
Channel Freq Tone
Number Codes
Frequency
Codes
[CH1 F02] 154.570MHz No Tone Code
programmed
(see page 9
for tone codes)
[CH2 F01] 154.600MHz ................
[CH3 F19] 151.820MHz ................
[CH4 F20] 151.880MHz ................
[CH5 F21] 151.940MHz ................
[CH6 F23] 154.570MHz ................
[CH7 F22] 154.600MHz ................
CH8 Blank ................... ................
[ display info ]
The PT-150M is PC programmable with special
Ritron software and programming cable. For the
FREE PC programming software download go to:
http://www.ritron.com/manuals.html
To order the programming software CD kit or USB
PC-to-radio programming cable (pn#214BE001),
Call Ritron at 800-872-1872.
Single Slot Rapid Charger
PT Radio
NH-PT
AC Adaptor