User's Manual

PF Menu
Assignable Accessible
Password Prevents unauthorized use of the radio.
At radio turn on user must enter 4 character
password before radio will operate. Password is
entered using the Up/Dwn scroll buttons and
MENU button. Yes Yes
Normal Scan ON/OFF Must be programmed by your
dealer. Channels must be agged as eligible scan
channels. Normal Scan will periodically check these
channels to prevent missed calls.Programmable function
button can be set to turn function ON or OFF. Icon will
appear on LCD display when scan is ON. Yes Yes
Priority Scan ON/OFF Must be enabled by your
dealer. Designates a priority channel that is checked
more frequently than other channels to prevent
missed calls. Yes Yes
Priority Scan Channel Allows the user to set the
priority channel from a list of available channels. No Yes
Nuisance Channel Delete Allows user to temporarily
delete nuisance channels from the scan list. When radio
is in scan mode and stops on the nuisance channel,
PRESS and HOLD the Scroll Down Button. Display will
ash “DELETED” when complete. Nuisance Channel
is now temporarily deleted from scan list. To restore
deleted channel, turn the radio OFF then ON again. No No
“Hands-Free” VOX ON/OFF Allows “hands-free” use
of the radio, with or without an audio accessory.
(I.e. a headset). Icon will appear on LCD display when ON. Yes Yes
VOX Level Allows user to select the voice audio level
required to “key” the transmitter. VOX Level can be set
from 0-15. A higher number makes the VOX circuit
“MORE” sensitive (“less” audio is required) to trigger
VOX operation. A lower number makes the VOX
circuit “LESS” sensitive (“more” audio is required). No Yes
Ear PTT ON/OFF Enables or disables microphone
on radio. Allows use of earbud (listen only) device
while microphone on radio remains enabled. No Yes
LED Indicator ON/OFF LED on top of the radio can
be set to “blink” green every 10 seconds. No Yes
Lone Worker Useful in situations where the radio
user works alone and is either required to or it would
be helpful to check in at regular intervals. PT Radio
can be programmed to sound a tone to remind the
Lone Worker that they must “call in”. If they do not call
in within the specied period, radio will automatically
send the Emergency code. No Yes
Radio Reset See your Dealer for details No Yes
PF Menu
Assignable Accessible
Group Select When programmed to a programmable
function button, allows quick access to a group of up to
10 pre-programmed channels. Yes Yes
Go To A Fixed (Pre-Set) Channel #, 1- 4 “Speed dial”
for quickly accessing pre-programmed channel(s).
Eliminates the need to scroll through channels.
A programmable function button can be assigned
to 1 of up to 4 pre-set channels. Yes No
Keypad Lock ON/OFF Prevents accidental activation
of the front panel buttons. Icon appears on LCD
display when ON. Yes Yes
Send A Selective Signaling Call Send a 2-tone Page
Code (e.g. GateGuard command code, 5 to7 Tone
Page or DTMF ANI Code on a per channel basis). Yes No
Alerts ON/OFF Turn keypad tones OFF for silent
operation. Icon will appear on LCD display when ON. Yes Yes
Send DTMF Digits Radio can be programmed by your
dealer to transmit unique DTMF digits on a per channel
basis and/or via programmable function button. Yes No
Talk Around ON/OFF Causes the radio to transmit on
the receive frequency on channels where the RX and TX
are not the same. Icon will appear on the LCD Display
when ON. Yes Yes
Tx/Rx Tone Select Select CTCSS or DCS encode and
decode tone codes on the current operating channel. Yes Yes
TX Power Level All channels are set for 2 watt operation NA NA
Battery Saver ON/OFF Battery life extended when ON. Yes Yes
Missed Call Displays a list of missed Selcall calls. Yes Yes
Contact List Select and send from a list of
pre-programmed encode codes. Yes Yes
E.g. 2-Tone GateGuard Command codes to open different gates,
turn on lights, pump control etc.
Status List Select & send from a list of pre-programmed
“status” messages. E.g. Text messaging. Yes Yes
Squelch Level Will display the current squelch level
and allow the user to raise or lower squelch with the Up
and Down buttons. Smaller numbers increase squelch
sensitivity, allowing the radio to hear weak and distant
signals. Larger numbers decrease sensitivity, only
strong signals are heard. Yes Yes
Missed Call List Delete Clears the Missed Call List. No Yes
Missed Call Send Will automatically send the Current
Status message if a Missed Call is detected. No Yes
continued...
7.
8.