Owner`s manual

qtm9322b.pm5
For assistance, call RITRON at 800-USA-1-USA (800-872-1872) or visit us at www.ritron.com
 ii 
NOTICE: The Quick Talk unit should not be used to
report conditions relating to safety of life or
property.
To reduce the risk of fire, electric shock or personal
injury, follow these basic safety instructions when
using this unit.
1. Read and follow all instructions.
2. Disconnect the unit before cleaning. Do not use liquid
or aerosol cleaners.
3. Use only approved power sources for the unit.
4. During thunderstorms, avoid contact with this unit and
any external antenna system or wiring.
5. The Quick Talk switch and external power terminals
are connected internally to the antenna connector. If
the Quick Talk switch or power supply terminals
contact high voltage, a hazardous condition may exist
in that contacting the antenna could prove injurious or
even fatal.
6. In general, the switches you connect to the Quick Talk
are to be independent dry contact switches, and not
part of any other "live" electrical circuit
7. If you are unsure whether your installation will be safe,
contact an experienced electrician or electronics
technician.
TABLE OF CONTENTS
DESCRIPTION PAGE
WHAT THIS MANUAL COVERS .................................... ii
WARNINGS AND CAUTIONS ........................................ ii
ACCESSORIES AND OPTIONS .................................... ii
INTRODUCTION ............................................................ 1
General Information ............................................ 1
Care and Maintenance ....................................... 1
PROGRAMMING ............................................................ 2
Before Programming the Unit ............................. 2
Programming the Transmitter Frequency .......... 2
Quiet Call Coded Squelch Codes ...................... 2
Digital Quiet Call Squelch Codes ...................... 2
Transmit Codes .................................................. 3
Quiet Call Tone Codes ....................................... 3
Programming the Initial Message ...................... 4
Programming Voice Phrase Repetitions ........... 4
Programming the All Clear Message ................. 4
Recording Low Battery Message ....................... 4
Limiting the Number of Transmissions ............. 4
Setting Narrow/Wide-band Channels ................ 5
Companded Audio Selector ................................ 5
Settings for Battery type ....................................... 5
Connecting to an External Power Supply ........... 6
CONTROLS & CONNECTORS ...................................... 7
INSTALLATION .............................................................. 8
RITRON WIRELESS SOLUTIONS ................................. 9
F.C.C. LICENSING ......................................................... 11
WARRANTY ................................................................. 11
ACCESSORIES FOR QUICK ASSIST
These replacement and optional items are available from
Ritron and its authorized dealers.
Item Description
14280010 3-sided "NEED SALES HELP?" Placard
14280011 3-sided "NEED SERVICE?" Placard
14280009 1-sided "NEED SALES HELP?" Placard
RAM-1545 Magnet-Mount Antenna
25605600 Cover Gasket
This manual covers the basic operation of the Quick
Assist Wireless Shopper's Callbox Transmitter. For
most applications, this is all the information you will
need.
However, if you have specific questions or need
assistance call Ritron at 317-846-1201, or visit the Ritron
website at www.ritron.com.
WHAT THIS MANUAL COVERS
  
WARNING
  
IMPORTANT SAFETY
INFORMATION