Operation Manual

 During the test, process events can be recorded in the APP, alarms can be set and test
reports can be generated and etc.
 After use, gently remove the device, tear off the double coated medical tape on the back
of the device, put it into the storage box, and the device will automatically enter the
sleep status.
Schematic diagram of electronic thermometer
Take out the Medical adhesive tape and the standby button cell from the storage box
Tear off the squre-shaped backing paper first
Tear off the ring-shaped backing paper after pasted
4. Button cell replacement
 Withhold the grooved part on the two sides of the thermometer by your thumb,open the
lid upwards;
 Press on the edge of the button cell by your nail,the button cell will pop up automatically.
Load new button button cell with positive pole downwards;
 Close the lid (the lid has no direction), check the lid around, and ensure the lid is closed
properly;