Operation Manual

Chapter 4 Electromagnetic compatibility
Electromagnetic compatibility statement
Notice：
Electronic thermometer(
RIT-P02-MED、RIT-P02-RR、RIT-P02-RS、RIT-P02-MM、RIT-P02-R1)
meets the relevant requirements of electromagnetic compatibility of YY0505 standard;
The user shall install and use the device by the electromagnetic compatibility
information provided by the random file;
Portable and mobile RF communication equipment may affect the performance. Avoid
strong electromagnetic interference when using, such as close to the mobile phone,
microwave oven, etc.
Please refer to the attachment for the guidance and manufacturer's statement.
Warning：
Electronic thermometer(RIT-P02-MED、RIT-P02-RR、RIT-P02-RS、RIT-P02-MM、RIT-P02-R1)
shall not be used close to or stacked with other equipment. If it has to be used close or
stacked with other equipment, it should be observed to verify that it works properly under
the configuration it uses.
In addition to the cables sold by the manufacturer as spare parts for internal
components, the use of accessories and cables other than those specified may result in
increased emission or reduced anti-interference of the product.
Even if other equipment conforms to the corresponding national standard emission
requirements, the equipment may still be interfered by other equipment.
The bluetooth receiving and transmitting working frequency of medical electronic
thermometer is 2.402GHz-2.480GHzISM frequency band, and channel bandwidth is 2MHz.
The frequency hopping technique GFSK modulation is adopted, and the transmitted power is
CLASS2 with the maximum transmitted power of 0dbm (typical).
Guide and manufacturer's statement - Electromagnetic emission