Data Sheet

3 - 2Technical System Catalogue/Climate control
1 TopTherm fan-and-filter units
Fan-and-filter units are ideal for dissipating heat loads
cost-effectively.
The prerequisite is that the ambient air must be relatively
clean with a temperature below the desired enclosure
internal temperature.
EMC variants of the entire range of fan-and-filter units are
also available.
2 Rack-mounted fans/
tangential fans
Rack-mounted climate control components are fitted
directly onto the 482.6 mm (19˝) mounting level.
Positioning directly beneath the electronic components
ensures effective cooling, and prevents the formation of
hot-spots.
3
Fan systems
Ready-to-use modules, equipped with fans, for effective air
throughput and minimal assembly work.
4
Air/air heat exchangers
The requirement for using air/air heat exchangers is that
the ambient temperature must be below the required
enclosure internal temperature.
Dust and contaminated ambient air are unable to ingress
the enclosure, thanks to the two separate air circuits.
Cooling with ambient air