Data Sheet

Technical System Catalogue/Climate control
Wall-mounted cooling units
3 - 29
Flexibility of wall mounting
Practical and stylish
 The mounting cut-out is chosen depending on the
mounting variant – either external, internal or partial inter-
nal mounting. This makes optimum use of the available
space.
 With external mounting, openings are only required for
air inlet and outlet.
 The enclosure surface containing the cut-out for partial
or full internal mounting is stabilised by the divided inter-
nal case construction.
 Special internal or external mounting kits are not
required.
Platform strategy
 Flexible output
Just 5 mounting cut-outs for 8 different output catego-
ries provide investment security and facilitate easy adap-
tation of the cooling output to the ambient conditions and
the installed heat loss.
 Rittal platform strategy
TopTherm air/air heat exchangers are also compatible
with the mounting cut-outs.
Integral
 Electrical condensate evaporation
Condensate arising inside the enclosure or on the eva-
porator coil of the cooling unit is effectively evaporated.
The evaporator device inside the cooling units has a very
high evaporation output (several litres per day), thanks to
the principle of direct evaporation.
 RiNano coating
The standard nano-surface finish on condenser coil fins
ensures a more constant cooling output over time and
eliminates the need for filter media in many areas.