Data Sheet

3 - 62
Aisle containment
Technical System Catalogue/Climate control
Cold aisle with raised floor
The CRAC system routes the cooled air to the cold aisle
via perforated raised base plates.
 Use of inexpensive standard CRAC cooling units sited
outside of the server area
 Even with low room heights, the raised floor height is
maximised for cooling air supply without flow losses
 Undisturbed and uniform distribution of cooling air in the
cold aisle guarantees high efficiency
 Favourable working conditions in the cold aisle thanks to
low temperature, air flow and noise factors
 Hardware racks not connected to the enclosure do not
impair the cooling efficiency of the cold aisle
Cold aisle without raised floor
The LCP Inline routes the cooled air directly to the cold
aisle at the front.
 Direct connection of the liquid cooling packages to an
external cold water supply
 Simple laying of pipework in the rack base/plinth
 Homogeneous distribution of cooling air in the cold aisle
guarantees a high level of efficiency
 Favourable working conditions in the cold aisle thanks to
low temperature, air flow and noise factors
 Hardware racks not connected to the containment sys-
tem do not impair cooling efficiency via the cold aisle
 Server rooms with lower heights may be effectively
cooled
Hot aisle without raised floor
The LCP Inline extracts the hot air directly from point where
it is created, optimising the performance of the cooling
units and significantly increasing the overall efficiency of
the system.
 Simple assembly using existing Rittal aisle containment
components
 Direct connection of the Liquid Cooling Packages
(TopTherm LCP Inline CW and DX) to an external cold
water supply
 Simple laying of pipework in the base/plinth
 Suitable for use with high heat losses
 Room-neutral dissipation of the heat loss