Data Sheet

Technical System Catalogue/Climate control
CS Outdoor climate control
3 - 79
Order information Catalogue 33, page 469
Air/air heat exchangers and cooling units
for CS modular enclosures
Benefits at a glance:
 Air/air heat exchangers for roof mounting,
spec. thermal output 30 W/K
 Cooling units for roof mounting,
useful cooling output 720 W – 1020 W
 Cooling units for wall mounting,
useful cooling output 750 W – 1050 W
 Cooling units for partial internal mounting,
useful cooling output 1250 W – 1600 W
Protection of the installed equipment is of central importance
in many locations, particularly outdoor enclosures which
may be sited in public spaces, need to be cleverly designed
to protect against unauthorised access. Depending on the
enclosure platform, the specified design principles are in-
corporated into the standard enclosure.
Some basic design principles:
 No externally visible or accessible screws. If screws are
unavoidable, special screw heads are used.
 Minimal gap between doors and side panels, no leverage
points.
 Modified closure and lock concepts, e.g. 3-point lock or
better.
The basic design of the enclosures also plays a major role
with regard to additional heating from sunlight: While single-
walled enclosures can heat up to extreme levels, the chim-
ney effect resulting from a twin-walled design reduces the
influence of sunlight.