User manual

Rittal enclosure cooling unit 23

6 Commissioning



Observe the aforementioned waiting period of at least

30 minutes before commissioning the unit after as-

sembly.



Next, switch on the voltage supply to the cooling unit.

The Rittal logo will initially appear on the display, fol-

lowed a short time later by the start screen.



You can now make your individual settings on the unit,

e.g. set the temperature or assign the network identi-

fier, etc. (refer to chapter 7 "Operation").

Note:

The oil must collect in the compressor in or-

der to ensure adequate lubrication and cool-

ing. For this reason, do not operate the

cooling unit for at least 30 minutes after as-

sembling the equipment.

Note:

It is not necessary to carry out leak or pres-

sure tests on the cooling unit prior to com-

missioning. Rittal has already done this in the

factory.