Data Sheet

Hygienic Design
Accessories
28 Rittal Hygienic DesignFurther technical information available on the Internet.
1
2
3
4
5
6
7
 Seal
 Cap nut
 Gripper jaws
 Shield spring
(EMC version only)
 Clamping ring
 Enclosure seal
 Base with locator
for assembly tool
HD cable gland
Applications:
◾ Manufacturing and packaging of foodstuffs etc.
◾ Clean room technology (e.g. pharmaceuticals)
◾ Biotechnology
◾ Chemical industry
Benefits:
◾ Smooth, solid exterior surfaces effectively pre-
vent the depositing of harmful micro-organisms
◾ Much easier, and therefore cheaper, to clean
compared with conventional cable glands
Material:
– Cap nut: Stainless steel 1.4305 (AISI 303)
– Seal: Conforms to FDA 21 CFR 177.2600
Protection category IP to IEC 60 529:
– IP 68 (5 bar, 30 min.)
Protection category IP to DIN 40 050-9:
– IP 69K
Standard version
EMC version
Size
Cable diameter
mm
Packs
of
Model No.
M12 x 1.5 3 – 6.5 5 pc(s). 2410.000
M16 x 1.5 5 – 10 5 pc(s). 2410.010
M20 x 1.5 6 – 12 5 pc(s). 2410.020
M25 x 1.5 12 – 17 5 pc(s). 2410.030
Size
Cable diameter
mm
Packs
of
Model No.
M16 x 1.5 5 – 10 5 pc(s). 2410.110
M20 x 1.5 6 – 12 5 pc(s). 2410.120
M25 x 1.5 12 – 17 5 pc(s). 2410.130
Critical points
with conventional
solutions
 Cable entry in front
of seal
 No minimum radii
on the hexagon
 External threads
 Gap caused by
O-ring on the
enclosure surface
Hygienic design
features
 Seal directly at the
cable entry
 Compliance with
minimum radii on the
hexagon
 No external threads
 Flush termination
between the cap nut
and the enclosure
3
4
2
1
3
4
2
1
Why use hygienic cable glands?
Stainless steel lock nut
To match HD cable glands.
Material:
– Stainless steel 1.4305 (AISI 303)
Size Packs of Model No.
M12 x 1.5 10 pc(s). 2410.200
M16 x 1.5 10 pc(s). 2410.210
M20 x 1.5 10 pc(s). 2410.220
M25 x 1.5 10 pc(s). 2410.230
Assembly tool
for HD cable gland
For attaching HD cable glands in an internal thread
or using lock nuts. This can be achieved either from
the inside or from the outside using an Allen key.
Supply includes:
– 1 pc(s). = Adaptor for sizes from M12 – M25
Packs of Model No.
1 pc(s). 2410.290