Operating instructions
Table Of Contents
- Doku_Standard_Wasser-RK_GB_V09.pdf
- General description
- Important safety measures
- Transport and handling
- Installation
- Electrical connection
- Start-up
- Hydrological data
- Maintenance
- Shutting down / disposing the cooling system
- General fault analysis
- Evaporator pressure
- Compressor is continuously being switched on and off
- No medium circulation
- Appendix
- Datenblatt_060535.pdf
- PID.pdf
- Schaltplan_englisch.pdf
- MPRA-SMK-A-0-Englisch.pdf
- BA_PMA-KS40-1_41-1_42-1_englisch.pdf
- Contents
- 1 Mounting 5
- 2 Electrical connections 6
- 3 Operation 10
- 4 Configuration level 21
- 4.1 Configuration survey 21
- 4.2 Configuration 22
- 4.3 Set-point processing 29
- 4.4 Configuration examples 30
- 4.4.1 On-Off controller / Signaller (inverse) 30
- 4.4.2 2-point controller (inverse) 31
- 4.4.3 3-point controller (relay & relay) 32
- 4.4.4 3-point stepping controller (relay & relay) 33
- 4.4.5 Continuous controller (inverse) 34
- 4.4.6 D - Y - Off controller / 2-point controller with pre-contact 35
- 4.4.7 KS4x-1 with measured value output 36
- 5 Parameter setting level 37
- 6 Calibration level 41
- 7 Programmer 44
- 8 Timer 46
- 9 BlueControl 49
- 10 Versions 50
- 11 Technical data 51
- 12 Safety hints 55
- Index
- Contents
- Parameterliste PMA_english.pdf
- BA_Strömungswächter_SI1000_englisch.pdf
- BA-IFM_Drucksensor PN7009_englisch.pdf
- Endress-Hauser-Display BA188Ra3_englisch.pdf
- Endress-Hauser-Messsonde_BA_englisch.pdf
- BA_FEC12_englisch.pdf
Product Structure
(Continued)
17
Process connection, Material Additional weight
A G ¾ A Thread ISO 228 316L
B G 1 A Thread ISO 228 316L 0,1 kg
C ¾” NPT Thread ANSI 316L
D 1” NPT Thread ANSI 316L 0,1 kg
E DN 50 PN 40 DIN 11851 316L
Hygienic connection 0,5 kg
F DN 40-51 (2”) ISO 2852 316L
Tri-Clamp connection 0,5 kg
Y Special version
5 Flanged process connection 316L
Flange type, Material
1B without process flange connection
1C DN 25 PN 6 B DIN 2527 316L 0,6 kg
1D DN 25 PN 25/40 B DIN 2527 316L 1,2 kg
1E DN 32 PN 6 B DIN 2527 316L 1,0 kg
1F DN 32 PN 25/40 B DIN 2527 316L 1,8 kg
1G DN 40 PN 6 B DIN 2527 316L 1,2 kg
1H DN 40 PN 25/40 B DIN 2527 316L 2,2 kg
1K DN 50 PN 6 B DIN 2527 316L 1,4 kg
1L DN 50 PN 25/40 B DIN 2527 316L 3,0 kg
2D DN 25 PN 25/40 DIN 2527 PTFE >316L 1,2 kg
2F DN 32 PN 25/40 DIN 2527 PTFE >316L 1,8 kg
2H DN 40 PN 25/40 DIN 2527 PTFE >316L 2,2 kg
2K DN 50 PN 6 DIN 2527 PTFE >316L 1,4 kg
2L DN 50 PN 25/40 DIN 2527 PTFE >316L 3,0 kg
3F DN 32 PN 40 F DIN 2512 316L 1,8 kg
3H DN 40 PN 40 F DIN 2512 316L 2,2 kg
3L DN 50 PN 40 F DIN 2512 316L 3,0 kg
4F DN 32 PN 40 N DIN 2512 316L 1,8 kg
4H DN 40 PN 40 N DIN 2512 316L 2,2 kg
4L DN 50 PN 40 N DIN 2512 316L 3,0 kg
5A 1" 150 lbs, RF, ANSI B16.5 316L 0,7 kg
5B 1" 300 lbs, RF, ANSI B16.5 316L 1,2 kg
5E 1½“ 150 lbs, RF, ANSI B16.5 316L 1,3 kg
5F 1½” 300 lbs, RF, ANSI B16.5 316L 2,5 kg
5G 2" 150 lbs, RF, ANSI B16.5 316L 2,2 kg
5H 2" 300 lbs, RF, ANSI B16.5 316L 3,0 kg
6A 1" 150 lbs, RF, ANSI B16.5 PTFE >316L 0,7 kg
6B 1" 300 lbs, RF, ANSI B16.5 PTFE >316L 1,2 kg
6E 1½“ 150 lbs, RF, ANSI B16.5 PTFE >316L 1,3 kg
6F 1½” 300 lbs, RF, ANSI B16.5 PTFE >316L 2,5 kg
6G 2" 150 lbs, RF, ANSI B16.5 PTFE >316Ti 2,2 kg
6H 2" 300 lbs, RF, ANSI B16.5 PTFE >316L 3,0 kg
only DC 11, 16 TEN/TES and DC 21 TEN
7A 10 K 25 A RF, JIS B2210 316L
7B 10 K 40 A RF, JIS B2210 316L
7C 10 K 50 A RF, JIS B2210 316L
7D 10 K 80 A RF, JIS B2210 316L
7L 10 K 100 A RF, JIS B2210 316L
8A 10 K 25 A RF, JIS B2210 PTFE >316L
8B 10 K 40 A RF, JIS B2210 PTFE >316L
8C 10 K 50 A RF, JIS B2210 PTFE >316L
8D 10 K 80 A RF, JIS B2210 PTFE >316L
8L 10 K 100 A RF, JIS B2210 PTFE >316L
DC 21 TES
7C 10 K 50 A RF, JIS B2210 316L
8A 10 K 25 A RF, JIS B2210 PTFE >316L
DC 26 TEN/TES
7A 10 K 25 A RF, JIS B2210 316L
7C 10 K 50 A RF, JIS B2210 316L
8A 10 K 25 A RF, JIS B2210 PTFE >316L
9Y Special version
Product designation (second part)
Basic type
Certificate
Build-up protection
Probe insulation
Active length L1
DC . . TE . -
DC . . TE . -
Continued Page 18