Operating instructions
Table Of Contents
- Doku_Standard_Wasser-RK_GB_V09.pdf
- General description
- Important safety measures
- Transport and handling
- Installation
- Electrical connection
- Start-up
- Hydrological data
- Maintenance
- Shutting down / disposing the cooling system
- General fault analysis
- Evaporator pressure
- Compressor is continuously being switched on and off
- No medium circulation
- Appendix
- Datenblatt_060535.pdf
- PID.pdf
- Schaltplan_englisch.pdf
- MPRA-SMK-A-0-Englisch.pdf
- BA_PMA-KS40-1_41-1_42-1_englisch.pdf
- Contents
- 1 Mounting 5
- 2 Electrical connections 6
- 3 Operation 10
- 4 Configuration level 21
- 4.1 Configuration survey 21
- 4.2 Configuration 22
- 4.3 Set-point processing 29
- 4.4 Configuration examples 30
- 4.4.1 On-Off controller / Signaller (inverse) 30
- 4.4.2 2-point controller (inverse) 31
- 4.4.3 3-point controller (relay & relay) 32
- 4.4.4 3-point stepping controller (relay & relay) 33
- 4.4.5 Continuous controller (inverse) 34
- 4.4.6 D - Y - Off controller / 2-point controller with pre-contact 35
- 4.4.7 KS4x-1 with measured value output 36
- 5 Parameter setting level 37
- 6 Calibration level 41
- 7 Programmer 44
- 8 Timer 46
- 9 BlueControl 49
- 10 Versions 50
- 11 Technical data 51
- 12 Safety hints 55
- Index
- Contents
- Parameterliste PMA_english.pdf
- BA_Strömungswächter_SI1000_englisch.pdf
- BA-IFM_Drucksensor PN7009_englisch.pdf
- Endress-Hauser-Display BA188Ra3_englisch.pdf
- Endress-Hauser-Messsonde_BA_englisch.pdf
- BA_FEC12_englisch.pdf
Operating KS4x-1 3
Contents
1 Mounting ..............................5
2 Electrical connections .......................6
2.1 Connecting diagram .........................6
2.2 Terminal connection.........................6
3 Operation .............................10
3.1 Front view .............................10
3.2 Behaviour after power-on .....................11
3.3 Operating level ...........................11
3.4 Maintenance manager / Error list ................12
3.5 Self-tuning .............................14
3.5.1 Preparation for self-tuning .......................14
3.5.2 Self-tuning sequence ..........................14
3.5.3 Self-tuning start ..........................15
3.5.4 Self-tuning cancellation ........................15
3.5.5 Acknowledgement procedures in case of unsuccessful self-tuning . 16
3.5.6 Examples for self-tuning attempts ..................16
3.6 Manual tuning ...........................17
3.7 Alarm handling...........................18
3.8 Operating structure.........................20
4 Configuration level ........................21
4.1 Configuration survey ......................21
4.2 Configuration ...........................22
4.3 Set-point processing ........................29
4.4 Configuration examples ......................30
4.4.1 On-Off controller / Signaller (inverse) .................30
4.4.2 2-point controller (inverse) .......................31
4.4.3 3-point controller (relay & relay) ....................32
4.4.4 3-point stepping controller (relay & relay) ...............33
4.4.5 Continuous controller (inverse) .....................34
4.4.6 - Y - Off controller / 2-point controller with pre-contact ......35
4.4.7 KS4x-1 with measured value output ..................36