Mixer User Manual

2
LINE CORD SAFETY TIPS
1. Never pull or yank on cord or appliance.
2. To insert plug, grasp firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove from outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are
found, this indicates that the appliance should be serviced and the line cord
replaced. Please return it to an authorized service representative.
5. Never wrap the cord tightly around the appliance, as this could place undue stress
on the cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
This appliance is for HOUSEHOLD USE ONLY. It may be plugged into an AC electrical
outlet (ordinary household current). Do not use any other electrical outlet.
Before you use this product for the first time, please take a few moments to read these
instructions and keep them for reference. Pay particular attention to the Safety Instructions
provided. Please review the product service and warranty statements.
POLARIZED PLUG:
This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the
plug does not fit fully into the outlet, reverse the plug and try again. If it still does not fit,
contact a qualified electrician. Do not attempt to modify the plug in any way.