Instructions / Assembly

ASSEMBLY INSTRUCTIONS
1. Carefully layout all parts in a line on a smooth surface.
2. Put the shade onto the metal cup, and then secure with the plastic ring.
3. Install bulb(s) (not included).
CAUTION - Refer to the wattage caution label located near the lamp holder for the maximum wattage
do not exceed the maximum wattage.
WARNING - Do not attempt to replace the bulb(s) while the lamp is plugged into a wall receptacle.
4. Insert the polarized plug to wall outlet and use the switch to turn the lamp on or off.
Note: The diagram illustrates the installation of your new luminaire. This is a representative drawing and
is not intended to match the style of your luminaire.
Note: This stained glass product has been protected with mineral oil as part of the finishing process.
Please use a soft dry cloth to remove any excess oil.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension
cord unless plug can be fully inserted. Do not alter the plug.
MADE IN CHINA