Instructions / Assembly

H (Finial)
1. Carefully unpack and take out the parts from carton.
2. Screw the Post (B) clockwise onto the Base (A) tightly.
3. Screw the Post (C) clockwise onto the Post (B) tightly.
4. Screw the Décor Piece (D) clockwise onto the Post (C) tightly, while pulling
the Polarized Plug Cord down through the Base (A).
F (Harp) 5. Squeeze Harp (F) together and insert into Saddle (E) tightly.
6. Install Bulb (not included) onto the Lampholder according to the instruction of
wattage label.
E (Saddle) 7. Place the Shade (G) onto the Harp (F), and then tighten Finial (H) clockwise to
D (Décor Piece)
secure the Shade (G).
C (Post)
Important Safety Instruction
This portable lamp has a polarized plug (One blade is wider than
B (Post)
the other) as a safety feature to reduce the risk of the electric shock.
This plug will fit in a polarized outlet only one way. If the plug does
not fit in the outlet, reverse the plug. If it still does not fit, consult a
Polarized Plug qualified electrician. Never use an extension cord unless the plug
A (BASE)
can be fully inserted. Do not alter the plug.
★ Keep this instruction for future reference
Made In China
Installation Instruction
Item No: 14083
Note: 120V/E26/TypeA-19/60W or 13W CFL Bulb (not Included)
G (Shade)
CAUTION - Refer to the wattage caution label located near the lampholder for
recommended maximum wattage-do not exceed recommended wattage.
WARNING - Do not attempt to replace the bulb while the lamp is plugged into a
wall receptacle.