Instructions / Assembly

ASSEMBLY INSTRUCTION
Note: The above diagram illustrates the installation of your
new luminary. This is a representative drawing and is not
intended to match the style of your luminary.
1. Carefully layout all parts in a line on a smooth surface, and use the following
steps to assemble the pedestal lighting.
2. Place the glass shade into the base, then
use wing nut to screw. (DO NOT OVER
TIGHTEN)
3. Install E26 Bulb A, 1x60W (Not Included) or
E26 CFL Bulb, 1x13W (Not Included)
Caution: Refer to the wattage caution label
located near the lamp holder for
recommended maximum wattage, do not
exceed recommended wattage
4. Place the cover into glass shade, then
screw the threaded screw into glass shade
carefully. (DO NOT OVER TIGHTEN)
5. Insert polarized plug into the wall
receptacle.
Warning: Do not attempt to replace the bulb
while the lamp is plugged into wall receptacle.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as
a safety feature to reduce the risk of electric shock. This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit it, contact a qualified electrician. Never use with
an extension cord unless plug can be fully inserted. Do not alter the plug.
Note: This stained glass product has been protected with mineral oil as part of
the finishing process. Please use a soft dry cloth to remove any excess oil.
MADE IN CHINA