Instructions / Assembly

ASSEMBLY INSTRUCTIONS

1. Place all parts on a flat smooth surface and

start the Lamp assembly

2. Lamp installation

CAUTION - Before starting the

installation, disconnect the power by

turning off the circuit breaker or by

removing the fuse at the fuse box.

Turning the power off using the light

switch is not sufficient to prevent

electrical shock

3. Install the Crossbar A to the ceiling outlet box

using the provided screws

4. Wiring: using the provided Wire Connectors

connect the Lamp BLACK wire to your

installation POSSITIVE wire, then connect

the Lamp WHITE wire to the NEUTRAL.

Lastly connect your house Ground wire and

the Lamp BARE GROUND wire to the

GROUND SCREW located in the Crossbar A

5. Gently push the wiring inside the electrical

box, then lift the lamp from the Canopy B and

using the two Canopy screws attach it to the

Crossbar A

6. Install the Big Shade on the Socket using the

Socket ring

7. Install the BULB(s) (Not included)

CAUTION - Refer to the

wattage caution label located near

the lamp holder for maximum

wattage - do not exceed the maximum

wattage

8. Lastly install the Small Shade to the Big Shade using

the provided D - Screws

CARE INSTRUCTIONS - Use only a soft cloth; do not use any chemicals or abrasive cleaners.

E26 Type A - 60W (Not included)

E26 CFL - 13W (Not included)

MADE IN CHINA