Instructions / Assembly

MODEL NO.: 20074

11. Light Kit Assembly

1. Remove the three (3) screws from the light kit and set

aside

2. Plug the connector from the light kit into the connectors

from the switch housing

3. Correct wiring

o White to White

o Black to Blue

4. Gently push the connectors into the switch housing and

align the holes in the light kit with the holes in the switch

housing. Secure the light kit with the three (3) removed

screws

5. Install the provided bulbs (See Page 3 for bulb type)

o Ensure the bulbs are securely fastened into the sockets

6. To attach shade, remove the finial from the threaded

pipe and set aside

7. Insert the pull chains through the designated holes in the

shade, and attach the pull chain extensions

8. Insert the shade onto the threaded pipe and re-attach

the finial, being careful not to overtighten

WARNING: DO NOT EXCEED INDICATED BULB WATTAGE

Alternative bulbs usage: CFL or Incandescent bulbs may be used. Ensure the Max. Wattage indicated on the

socket labels is not exceeded, and verify the bulbs do not get in contact with any metal part of the fan components

(shade or motor housing)

Tiered Shade Installation (if applicable)

1. Remove the three (3) screws from Shade A and set

aside

2. Thread the pull chains through the designated holes in

Shade B

3. Align the three (3) holes from Shade B with the holes in

Shade A and insert the three (3) removed screws