Use and Care Manual

ASSEMBLY INSTRUCTION
CAUTION - Refer to the wattage caution label located near the lamp holder for maximum
wattage - do not exceed the maximum wattage.
WARNING - Do not attempt to replace the bulb(s) while the lamp is plugged into a wall
receptacle
CARE INSTRUCTIONS - Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
E26 Type A.60W X 1 (Not included)
E26 CFL 13W X 1 (Not included)
MADE IN CHINA
1. Attach the mounting bracket(C)to the outlet box by using two
mounting screws(E).
2. Pull out the outlet wires and housing grounding wire from the
outlet box. Make wire connections using the wire nuts (B):
--WHITE wire with WHITE-NEUTRAL
--BLACK wire with BLACK-LIVE
--Attached the fixture grounding wire to mounting bracket with
green grounding screw(D). Carefully tuck the wires back into the
outlet box.
3. Secure the canopy (F) to the metal mounting bracket (C) with
screws provided (G).
4. Attached the lamp shade to the lamp holder(A),then secure it
with socket ring.
5. Install the bulb (not included).