Instructions / Assembly

ASSEMBLY INSTRUCTIONS

1. Carefully layout all parts in a line on a smooth surface.

2. Place the base on a flat surface.

3. Install bulb.

4. Mount the harp into the bracket.

5. Put the shade onto the top of harp and secure with finial (DO NOT OVERTIGHTEN).

CAUTION - Refer to the wattage caution label located near the lamp holder for recommended

maximum wattage-do not exceeds recommended wattage.

WARNING - Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle.

6. Insert plug into wall receptacle.

BRACKET

SWITCH

Note: 1. The above diagram illustrates the installation of your new luminaire. This is a representative

drawing and is not intended to match the style of your luminaire.

2. This stained glass product has been protected with mineral oil as part of the finishing

process. Please use a soft dry cloth to remove any excess oil.

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to

reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not

fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with

an extension cord unless plug can be fully inserted. Do not alter the plug.

MADE IN CHINA

PAGE 1
ASSEMBLY INSTRUCTIONS 1. 2. 3. 4. 5. Carefully layout all parts in a line on a smooth surface. Place the base on a flat surface. Install bulb. Mount the harp into the bracket. Put the shade onto the top of harp and secure with finial (DO NOT OVERTIGHTEN). CAUTION - Refer to the wattage caution label located near the lamp holder for recommended maximum wattage-do not exceeds recommended wattage. WARNING - Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle. 6.