Manual

STEPS 12 & 13:

With both pulleys and the belt installed the

clutch plates can now be installed. Install the

clutch plates in exactly the same order as they

were shipped. The steel .120” thick plate first,

then a fiber plate, then steel, alternating until

all the plates are installed. Last plate in is

steel. When in doubt, call Rivera Primo Inc.,

and consult a technician.

STEP

14:

Apply anti-seize compound liberally to the the threads of the

Pro-Clutch studs as shown to prevent the shouldered nuts from

sticking to the clutch-hub stud threads during disassembly.

STEP

15:

Install the pressure plate, diaphragm spring,

spring retainer (beveled side in) lock-tabs and

shouldered nuts as shown.