User Manual Part 1

Wi-Fi Array
126 Viewing Status on the Wi-Fi Array
be using adjacent channels. To make channel selections for a specific
IAP, go to “IAP Settings” on page 271.
• Antenna: Shows which antenna is being used by each IAP.
• Cell Size: Indicates which cell size setting is currently active for each
IAP — small, medium, large, max, automatic, or manually defined by
you. The cell size of an IAP is a function of its transmit power and
determines the IAP’s overall coverage. To define cell sizes, go to “IAP
Settings” on page 271. For additional information about cell sizes and
the importance of planning for and defining the optimum cell sizes
for your Array, go to “Coverage and Capacity Planning” on page 62.
Figure 48. IAP Cells
• Tx Power: Shows the transmit power for each IAP.
• Rx Threshold: Shows the receive threshold for each IAP.
• Stations: Informs you how many client stations are currently
associated with each IAP. XR and XN Arrays can handle up to 96
concurrent users per individual IAP, thus 16-port XN models can
handle 1536 users per Array.
• WDS Link: The WDS Link on this radio (if any). See “WDS” on
page 305.
• MAC Address/BSSID: Shows the MAC address for each IAP.
• Description: The description (if any) that you set for this IAP.