User Manual Part 1

Wi-Fi Array
130 Viewing Status on the Wi-Fi Array
 ARP Table — displays information about Address Resolution Protocol on
this Array.
 DHCP Leases — displays information about IP addresses (leases) that the
Array has allocated to client stations.
 Connection Tracking/NAT — lists connections that have been established
for client stations.
 CDP Neighbors — lists neighboring network devices using Cisco
Discovery Protocol.
 Network Assurance — shows results of connectivity tests for network
servers.
Network
This window provides a snapshot of the configuration settings currently
established for Array’s wired interfaces. Depending on the model, this may
include the 10/100 Ethernet 0 interface and the Gigabit 1 and Gigabit 2 interfaces.
DNS Settings are summarized as well. You can click on any item in the Interface
column to go to the associated configuration window.
Figure 52. Network Settings
WMI windows that allow you to change or view configuration settings associated
with the network interfaces include:
 “Network Interfaces” on page 180
 “DNS Settings” on page 187
 “CDP Settings” on page 189