User Manual Part 2
Wi-Fi Array
yarrA iF-iW eht gnirugifnoC872
Procedure for Conguring Global IAP Settings
2. IAP Status : Click on the Enable All IAPs button to enable all IAPs for
this Array, or click on the Disable All IAPs button to disable all IAPs.
3. Short Retries : This sets the maximum number of transmission attempts
for a frame , the length of which is less than or equal to the RTS Threshold,
before a failure condition is indicated. The default value is 7. Enter a new
value (1 to 128) in the Short Retry Limit eld if you want to increase or
decrease this attribute.
4. Long Retries : This sets the maximum number of transmission attempts
for a
frame , the length of which is greater than the RTS Threshold, before
a failure condition is indicated. The default value is 4. Enter a new value
(1 to 128) in the Long Retry Limit eld if you want to increase or decrease
this attribute.
Some of the features below, such as Load Balancing, are only available if the
Array’s license includes the Xirrus Advanced RF Performance Manager
(RPM) . If a setting is unavailable (grayed out), then your license does not
support the feature. See “About Licensing and Upgrades” on page 325 .