User Manual Part 2

Wi-Fi Array
Configuring the Wi-Fi Array 291
Global Settings .11n
This window is displayed only for XR and XN Array models. It allows you to
establish global 802.11n IAP settings. These settings include enabling or disabling
802.11n mode for the entire Array, specifying the number of transmit and receive
chains (data stream) used for spatial multiplexing, setting a short or standard
guard interval, auto-configuring channel bonding, and specifying whether auto-
configured channel bonding will be static or dynamic.
Before changing your settings for 802.11n, please read the discussion in “IEEE
802.11n Deployment Considerations” on page 72.
Figure 132. Global Settings .11n