User Manual Part 2

Wi-Fi Array

198 Configuring the Wi-Fi Array

7. Syslog Levels: For each of the Syslog destinations, choose your preferred

level of Syslog reporting from the pull-down list. Messages with

criticality at the selected level and above will be shown. The default level

varies depending on the destination.

a. Console Logging: For messages to be echoed to the console, the

default level is Critical and more serious. This prevents large

numbers of non-critical messages from being displayed on the

console. If you set this level too low, the volume of messages may

make it very difficult to work with the CLI or view other output on

the console.

b. Local File: For records to be stored on the Array’s internal Syslog file,

choose your preferred level of Syslog reporting from the pull-down

list. The default level is Debugging and more serious.

c. Primary Server: Choose the preferred level of Syslog reporting for the

primary server. The default level is Debugging and more serious.

d. Secondary/Tertiary Server: Choose the preferred level of reporting

for the secondary/tertiary server. The default level is Information

and more serious. (Optional)

e. Email SMTP Server: Choose the preferred level of Syslog reporting

for the email notifications. The default level is Warning and more

serious. This prevents your mailbox from being filled up with a large

number of less severe messages such as informational messages.

8. Click on the Apply button to apply the new settings to this session, or

click Save to apply your changes and make them permanent.