User Guide Part 2

Wi-Fi Array

380 Appendix A: Servicing the Wi-Fi Array

Replacing the Main System Memory

Use this procedure when you want to replace the main system memory.

1. Remove the access panel (refer to “Removing the Access Panel” on

page 373).

2. Remove the DIMM memory module, taking care not to “wiggle” the

module and risk damaging the connection points.

Figure 181. Removing the DIMM Memory Module

3. The removal procedure is complete. You can now reinstall the DIMM

memory module (or install a new module). Ensure that the DIMM

memory module is seated evenly and the locking tabs are in the upright

position. The DIMM memory module is keyed to fit in its socket in one

direction only.

4. Reinstall the access panel (refer to “Reinstalling the Access Panel” on

page 376).