User Guide Part 2

Wi-Fi Array
246 Configuring the Wi-Fi Array
allows you to replace the default login page, if you wish. Please see “Web
Page Redirect” on page 300 for more information.
To set up internal login, set Server to Internal Login.
The user name and password are obtained by the login page, and
authentication occurs according to your configured authentication
information (starting with Step 10 above). These parameters are
configured as described in “Procedure for Configuring Network
Security” on page 226.
After authentication, the browser is redirected back to the captured URL.
If you want the user redirected to a specific landing page instead, enter its
address in Landing Page URL.
z
External Login page
This option redirects the user to a login page on an external web server
for authentication, instead of the first user-requested URL. Login
information (user name and password) must be obtained by that page,
and returned to the Array for authentication.
Authentication occurs according to your configured RADIUS
information. These parameters are configured as described in “Procedure
for Configuring Network Security” on page 226. After authentication, the
browser is redirected back to the captured URL. If you want the user
redirected to a specific landing page instead, enter its address in Landing
Page URL.
To set up external login page usage, set Server to External. Enter the URL
of the external web server in Redirect URL, and enter that server’s shared
secret in Redirect Password.
#
Both the Internal Login and External Login options of WPR perform
authentication using your configured RADIUS servers.