User Guide Part 2

Wi-Fi Array
Configuring the Wi-Fi Array 247
Groups
This is a status-only window that allows you to review user Group assignments.
It includes the group name, Radius ID, VLAN IDs and QoS parameters and
roaming layer defined for each group, and DHCP pools and web page redirect
information defined for the group. You may click on a group’s name to jump to
the edit page for the group. There are no configuration options available on this
page, but if you are experiencing problems or reviewing group management
parameters, you may want to print this page for your records.
The Limits section of this window shows any limitations configured for your
defined groups. For example, this window shows the current state of a group
(enabled or disabled), how much group and per-station traffic is allowed, time on
and time off, and days on and off.
For information to help you understand groups, see Understanding Groups
below. For an in-depth discussion, please see the Xirrus User Groups Application
Note in the Xirrus Library
.
Figure 135. Groups
Understanding Groups
User groups allow administrators to assign specific network parameters to users
through RADIUS privileges rather than having to map users to a specific SSID.
Groups provide flexible control over user privileges without the need to create
large numbers of SSIDs.