User Guide Part 2

Wi-Fi Array
414 Appendix C: Technical Support
Power over Gigabit Ethernet Compatibility Matrix
The Xirrus Power over Gigabit Ethernet (PoGE) solution includes different
modules to be used with particular Array models. The following two tables
indicate the proper PoGE injector/splitters to use with each Array. X indicates
products are INCOMPATIBLE. NA=Not Applicable.
Table 1: Current PoGE Injectors/Splitters
Array Model
Compatible
Xirrus Injector/Splitter
XP1-MSI-X
Injector
XP8-MSI
Injector
XP1-MSI
Injector
XP1-SPL
Splitter
XS4 Works with any PoGE
injector/splitter
3333
XS8, XN4 Works with any PoGE injector,
no splitter required
333 NA
XN16/XN12/
XN8/XN4,
XS16/XS12
Works with two injector
options, no splitter required
3
3
1
1. The 8-port XP8-MSI-H and XP8-MSI injectors each power up to eight
4-port or 8-port Arrays; or four 16-port Arrays.
X NA
XS-3500-4 Works with any PoGE
injector/splitter
3333
XS-3700-8, DC
(modified)
2
2. To see whether an Array is modified, see Figure 188 on page 416.
Works only with legacy
injector/splitter models, see
Table 2.
X X XX
XS-3900-16, DC
(modified)
2
X X XX
XS-3700-8, DC
(unmodified)
DO NOT connect unmodified
XS-3700/3900 with -H or -HX
injectors or splitter.
X
333
XS-3900-16, DC
(unmodified)
X
3
1
33