User Guide Part 2

Wi-Fi Array

252 Configuring the Wi-Fi Array

To eliminate confusion, we recommend that you configure one set of limits or the

other, but not both.

11. Stations: Enter the maximum number of stations allowed on this group.

The default is 1024.

12. Overall Traffic: Check the Unlimited checkbox if you do not want to

place a restriction on the traffic for this group, or enter a value in the

Packets/Sec field and make sure that the Unlimited box is unchecked to

force a traffic restriction.

13. Traffic per Station: Check the Unlimited checkbox if you do not want to

place a restriction on the traffic per station for this group, or enter a value

in the Packets/Sec field and make sure that the Unlimited box is

unchecked to force a traffic restriction.

14. Days Active: Choose Everyday if you want this group to be active every

day of the week, or select only the specific days that you want this group

to be active. Days that are not checked are considered to be the inactive

days.

15. Time Active: Choose Always if you want this group active without

interruption, or enter values in the Time On and Time Off fields to limit

the time that group members may associate.

16. Click on the Apply button to apply the changes to the selected group, or

click Save to apply your changes and make them permanent.

17. To delete an entry, check its Delete checkbox, then click the Save button to

permanently remove the entry.