User Guide Part 2

Wi-Fi Array

288 Configuring the Wi-Fi Array

5. Target SSID: Enter the SSID that the target Array is using.

6. Username: Enter a username for this WDS link. A username and

password is required if the SSID is using PEAP for WDS authentication

from the internal RADIUS server.

7. Password: Enter a password for this WDS link.

8. Clear Settings: Click on the Clear button to reset all of the fields on this

line.

9. Click on the Apply button to apply your changes to this session, or click

Save to apply your changes and make them permanent.

WDS Client Link IAP Assignments:

10. For each desired client link, select the IAPs that are part of that link.

11. Auto Configure: Click this button to instruct the Array to automatically

determine the best channel allocation settings for each IAP that

participates in a WDS link, based on changes in the environment. These

changes are executed immediately, and are automatically applied.

12. Reset All Links: this command tears down all links configured on the

Array and sets them back to their factory defaults, effective immediately.