Quick Install Guide
Table Of Contents
- 1) You Need the Following Items
- 2) Choose a Suitable Location
- 3) Prepare a Ground Source
- 4) Attach the Mounting Plate to the Array
- 5) Mount the Array on a Pole or Wall
- 6) Ground to Earth Ground
- 7) Install Antennas
- 8) Connect the Ethernet Cable with the Waterproof Connector
- 9) Connect the Antenna
- 10) Zero-Touch Provisioning and Ongoing Management
- Dimensions
- Notices, Warnings, & Compliance Statements
XR-2425H Quick Installation Guide
is a registered trademark of Xirrus, Inc. All other trademarks and brand names are
marks of their respective holders.
All rights reserved. This document may not be reproduced or disclosed in whole or in part by
any means without the written consent of Xirrus, Inc.
Please see Warranty and License Agreements in the Wireless Array User’s Guide.
Document Part Number: 812-0085-006 Revision C February, 2014