User's Guide

Wireless Array

384 Using Tools on the Wireless Array

accessing the network, you can quickly determine if there is a basic

RADIUS problem by using the RADIUS Ping tool. For example, in

Figure 184 (A), RADIUS Ping is unable to contact the server. In Figure 184

(B), RADIUS Ping verifies that the host information and secret for a

RADIUS server are correct, but that the user account information is not.

Select RADIUS allows you to select a RADIUS server that you have

already configured. When you make a choice in this field, additional

fields will be displayed. Set Select RADIUS to External Radius, Internal

Radius, or a server specified for a particular SSID, or select Other Server

to specify another server by entering its Host name or IP address, Port,

and shared Secret.

Enter the RADIUS Credentials: Username and Password. Select the

Authentication Type, PAP or CHAP. Click the Execute button to run the

command. The message Testing RADIUS connection appears. Click OK

to proceed.

Figure 184. Radius Ping Output

19. IP Address: For Ping or Trace Route, enter the IP address of the target

device.

20. Timeout: For Ping or Trace Route, enter a value (in seconds) before the

action times out.