User's Guide

Wireless Array
Appendix D: Notices (XR500/600 Series Only) 535
Safety Warnings
Translated safety warnings appear on the following page.
#
This Appendix contains Notices, Warnings, and Compliance information for
the XR500/600 Series only. For other models, see the notes under
“Appendix C: Notices (Arrays except XR-500/600 and Models Ending in
H)” on page 501.
!
Safety Warnings
Read all user documentation before powering this device. All Xirrus
interconnected equipment should be contained indoors. This product is
not suitable for outdoor operation. Please verify the integrity of the
system ground prior to installing Xirrus equipment. Additionally,
verify that the ambient operating temperature does not exceed 50°C
(40°C for the XR500/600 Series).
!
Explosive Device Proximity Warning
Do not operate the XR Series Wireless Array near unshielded blasting
caps or in an explosive environment unless the device has been
modified to be especially qualified for such use.
!
Lightning Activity Warning
Do not work on the XR Series Wireless Array or connect or disconnect
cables during periods of lightning activity.
!
Circuit Breaker Warning
The XR Series Wireless Array relies on the building’s installation for
over current protection. Ensure that a fuse or circuit breaker no larger
than 120 VAC, 15A (U.S.) or 240 VAC, 10A (International) is used on all
current-carrying conductors.