User's Guide

Wireless Array

Configuring the Wireless Array 217

Privilege level 0 is read-only. As a minimum, all administrators have permission

for read access to all areas of Array configuration. Higher privilege levels may be

used to define additional privileges for specific configuration sections.

If you are using an Admin RADIUS server to define administrator accounts,

please see “RADIUS Vendor Specific Attribute (VSA) for Xirrus” on page 491 to

set the privilege level for each administrator.

Procedure for Configuring Admin Privileges

1. Privilege Level Names (optional): You may assign a Name to each

Privilege Level. The name may be used to describe the access granted by

this level. By default, levels 0 and 1 are named read-only and read-write,

respectively, and levels 2 through 7 have the same name as their level

number.

2. Privilege Levels: Use this section to assign a Minimum Privilege Level

to selected Configuration Sections as desired. By default, all sections are

assigned level 1. When you select a higher privilege level for a

configuration section, then only administrators who have at least that

privilege level will be able to make configuration changes to that section.

3. You may click ^ at the bottom of any row to toggle the values in the entire

column to either on or off.

4. Click Save changes to flash if you wish to make your changes

permanent.