User's Guide

Wireless Array
Viewing Status on the Wireless Array 91
Viewing Status on the Wireless
Array
These windows provide status information and statistics for your Array using the
product’s embedded Web Management Interface (WMI). You cannot make
configuration changes to your Array from these windows. The following topics
have been organized into functional areas that reflect the flow and content of the
Status section of the navigation tree in the left frame of the WMI.
z
“Array Status Windows” on page 92
z
“Network Status Windows” on page 100
z
“RF Monitor Windows” on page 111
z
“Station Status Windows” on page 122
z
“Statistics Windows” on page 137
z
“Application Control Windows” on page 147
z
“System Log Window” on page 154
z
“IDS Event Log Window” on page 155
Configuration and Tools windows are not discussed here. For information on
these windows, please see:
z
“Configuring the Wireless Array” on page 157
z
“Using Tools on the Wireless Array” on page 371
Note that the Status menu section may be collapsed down to hide the headings
under it by clicking it. Click again to display the headings. (See Figure 41 on
page 85)
#
If you are a Cloud XMS customer, then Arrays are managed via the cloud,
and local Array management interfaces are inaccessible.
If the Array is being managed by your own server for XMS Release 6.5 or
above, and if the Array has been assigned to a named network in XMS, you
will be restricted to read-only Array access. See “XMS-Managed Arrays
Restrict Local Management” on page 78.