User's Guide

Wireless Array
Viewing Status on the Wireless Array 97
The Array checks connectivity to network servers that you have
configured (for example, DNS and NTP servers) on an ongoing basis. For
each Setting, this list shows the server’s Host Name (if any), IP Address,
and Status.
Network assurance must be enabled on the Array in order to perform
these connectivity tests and display this information. See “Management
Control” on page 221.
z
Operating Status Section
This section shows the Array controller board’s current internal
temperatures and current fan speed. (Figure 47)
See Also
Management Control
Network Interfaces
Network Bonds
IAP Settings
Network Assurance