User's Guide

Wireless Array
Viewing Status on the Wireless Array 123
Stations
This status-only window shows client stations currently visible to the Array. You
may choose to view only stations that have Associated to the Array, or only
stations that are Unassociated, or both, by selecting the appropriate checkboxes
above the list. The list always shows the MAC address of each station, its IP
address, the SSID used for the association, the Group (if any) that this station
belongs to, its VLAN, its QoS, the IAP used for the association, transmit and
receive rates, the RSSI for each station, and how long each association has been
active (up time).
You may click other checkboxes above the list to show a number of additional
columns:
z
Identification: shows more identifying information for the station — its
User Name, Host Name, Manufacturer, Device Type, and Device Class
(for example, notebook, iPad, etc.).
z
Security: includes security settings used by the connection —
Enc(ryption) type, Cipher used, Key Mgmt used, and Media supported
by the station.
z
Connection Info: shows the Band (5GHz or 2.4 GHz) and Channel(s)
used (plus bonded channel, if any, for 802.11n). Shows additional RF
measurements that affect the quality of the connection: SNR (signal to
noise ratio) and Silence — the ambient noise (floor) value.
Figure 69. Stations
You may sort the rows based on any column that has an active column header,
indicated when the mouse pointer changes to the hand icon . Click again to