User's Guide

Wireless Array
176 Configuring the Wireless Array
Active VLANs list. If you create new VLANs, they will not be passed
unless you take action to add them to the list.
5. Mirror — Specify one of the active bonds (Bondx) that is to be mirrored by
this bond (Bondy). (Figure 104) All wireless traffic received on the Array
is transmitted out both Bondx and Bondy. All traffic received on Bondx is
passed on to the onboard processor as well as out Bondy. All traffic
received on Bondy is passed on to the onboard processor as well as out
Bondx. This allows a network analyzer to be plugged into Bondy to
capture traffic for troubleshooting, while the bonded ports provide
network connectivity for data traffic.
If each bond contains just one port, then you have the simple case of one
port mirroring another.
Figure 104. Mirroring Traffic
6. When done configuring bonds as desired, click Save changes to flash if
you wish to make your changes permanent.