User's Guide

Wireless Array
Installing the Wireless Array 43
802.11n Capacity
802.11n offers major increases in capacity over previous 802.11 standards, as
shown in the table below.
Failover Planning
This section discusses failover protection at the unit and port levels. To ensure
that service is continued in the event of a port failure, you can utilize two Gigabit
Ethernet ports simultaneously as a bonded pair (on Arrays with two or more
Gigabit ports).
Figure 22. Port Failover Protection
802.11 Mode # Channels Max Theoretical Capacity
802.11 a/n: 3 Streams 23 23 * 450 Mbps = 10.2 Gbps
802.11 a/n: 2 Streams 23 23 * 300 Mbps = 6.8 Gbps
802.11 a/n: 1 Stream 23 23 * 150 Mbps = 3.4 Gbps
802.11 a 23 23 * 54 Mbps = 1.2 Gbps
802.11 g/n: 3 Streams 3 3 * 450 Mbps = 1.35 Gbps
(1 or 2 streams have
proportionally lower capacity)
802.11 g 3 3 * 54 Mbps = 162 Mbps
802.11 b 3 3 * 11 Mbps = 33 Mbps
Ethernet switch
Multiple port connections