User's Manual

Wireless Array
462
Radio Assurance Options
If the monitor detects a problem with an Array radio as de
scribed above, it will
take action according to the preference that you have specified in the Radio
Assurance Mode setting on the Advanced RF Settings window (see Step 2
page 315):
 Failure alerts only — The Array will issue alerts in the Syslog, but will not
initiate repairs or reboots.
 Failure alerts & repairs, but no reboots — The Array will issue alerts and
perform resets of the PHY and MAC as described above.
 Failure alerts & repairs & reboots if needed — The Array will issue
alerts, perform resets of the PHY and MAC, and schedule reboots as
described above.
 Disabled — Disable IAP loopback tests (no self-monitoring occurs).
Loopback tests are disabled by default.