User's Manual
Table Of Contents
- XS-3900 User’s Guide
- Front Matter
- Table of Contents
- List of Figures
- Introduction
- Installing the XS-3900
- Installation Prerequisites
- Planning Your Installation
- Installation Workflow
- Unpacking the XS-3900
- Installing the XS-3900
- Powering Up the XS-3900
- Establishing Communication with the Array
- Performing the Express Setup Procedure
- The Web Management Interface
- Configuring the XS-3900
- Logging In
- Making Configuration Changes to the XS-3900
- Array Status
- Express Setup
- Network Interfaces
- IAP Interfaces
- SSID Management
- Security
- Users
- Services
- Software
- Tools
- Event Log
- The Command Line Interface
- Establishing a Secure Shell (SSH) Connection
- Basic Commands
- Command Modes
- Selecting Interfaces
- Command Line Keywords
- Interface Selection
- Interface Configuration
- Radio Configuration
- Beacon Information
- System Administration
- System Testing
- Security
- Station Timeouts
- SSID Configuration
- DNS Configuration
- NTP Configuration
- DHCP Configuration
- Syslog Configuration
- SNMP Configuration
- Filters
- Radius Configuration
- Reports
- Data Handling
- Data Clearance
- Show Information
- Remove Configuration
- Help
- Appendix A: Quick Reference Guide
- Appendix B: Technical Support
- Glossary of Terms
- Index
Wireless LAN Array
The Command Line Interface 129
default_rates
description
dot11gonly
dot11preamble
down
edcf
enable1
Description: Set default rates
Usage: <rnum> { default_rates }
Parameters: <rnum> defines the radio number, between 1 and 16
Description: Specify a name to identify this interface
Usage: <rnum> { description <dot11desc> }
Parameters: <rnum> defines the radio number, between 1 and 16
<dot11desc> is defined as a string of up to 50 alphanumeric
characters
Description: Enable support for 802.11g only
Usage: <rnum> { dot11gonly }
Parameters: <rnum> defines the radio number, between 1 and 16
Description: Define the preamble
Usage: <rnum> { dot11preamble }
Parameters: <rnum> defines the radio number, between 1 and 16
Description: Shut down (disable) this radio interface
Usage: <rnum> { down }
Parameters: <rnum> defines the radio number, between 1 and 16
Description: Enable EDCF support
Usage: <rnum> { edcf }
Parameters: <rnum> defines the radio number, between 1 and 16
Description: Allow 1 Mbps rate
Usage: <rnum> { enable1 }
Parameters: <rnum> defines the radio number, between 13 and 16