User's Manual

Wireless LAN Array
136 The Command Line Interface
Txleft
tx-pwr
Txright
up
worldbeacon
Beacon Information
The following keywords are used when establishing beacon information.
beacon
Description: Specify the left antenna
Usage: <rnum> { Txleft }
Parameters: <rnum> defines the radio number, between 1 and 16
Description: Define the transmit power settings
Usage: <rnum> { tx-pwr <pwrset> }
Parameters: <rnum> defines the radio number, between 1 and 16
<pwrset> is defined as either 0, 1 or 2, where:
0 = quarter, 1 = half, 2 = maximum
Description: Specify the right antenna
Usage: <rnum> { Txright }
Parameters: <rnum> defines the radio number, between 1 and 16
Description: Bring up (enable) this radio interface
Usage: <rnum> { up }
Parameters: <rnum> defines the radio number, between 1 and 16
Description: Enable support for world mode beacons
Usage: <rnum> { worldbeacon }
Parameters: <rnum> defines the radio number, between 1 and 16
Description: Establish beacon information
Usage: beacon { period | DTIM-rate }
Parameters: none