User's Manual

Wireless LAN Array
The Command Line Interface 137
DTIM-rate
period
System Administration
The following keywords are used for system administration tasks.
administrator
clock-set
contact-info
Description: Determine beacon periods before the Delivery Traffic
Indication Message (DTIM) is sent
Usage: beacon { DTIM-rate <beaconr> }
Parameters: <beaconr> defines the period between DTIM frames, in Kusecs
(kilo microseconds), where 1 Kusec = 1024 microseconds
Description: Establish the amount of time between beacons
Usage: beacon { period <beaconp> }
Parameters: <beaconp> defines the period between beacons, in Kusecs (kilo
microseconds), where 1 Kusec = 1024 microseconds
Description: Define the administrator access parameters
Usage: administrator { defpw | userid <uid> }
Parameters: <uid> enter a unique user ID
Description: Set the date/time within the XS-3900
Usage: clock-set <curdate>
Parameters: <curdate> defines the current date and time, specified in the
following format: MMDDhhmmYYYY
Description: Define the contact information for assistance on this XS-3900
Usage: contact-info { name <conname> | email <emailcontact>|
telephone <contele> }
Parameters: <conname> defines the contact name, up to 50 characters
<emailcontact> defines the email address of the contact, up to
50 characters
<contele> defines the telephone number of the contact