User's Manual
Table Of Contents
- XS-3900 User’s Guide
- Front Matter
- Table of Contents
- List of Figures
- Introduction
- Installing the XS-3900
- Installation Prerequisites
- Planning Your Installation
- Installation Workflow
- Unpacking the XS-3900
- Installing the XS-3900
- Powering Up the XS-3900
- Establishing Communication with the Array
- Performing the Express Setup Procedure
- The Web Management Interface
- Configuring the XS-3900
- Logging In
- Making Configuration Changes to the XS-3900
- Array Status
- Express Setup
- Network Interfaces
- IAP Interfaces
- SSID Management
- Security
- Users
- Services
- Software
- Tools
- Event Log
- The Command Line Interface
- Establishing a Secure Shell (SSH) Connection
- Basic Commands
- Command Modes
- Selecting Interfaces
- Command Line Keywords
- Interface Selection
- Interface Configuration
- Radio Configuration
- Beacon Information
- System Administration
- System Testing
- Security
- Station Timeouts
- SSID Configuration
- DNS Configuration
- NTP Configuration
- DHCP Configuration
- Syslog Configuration
- SNMP Configuration
- Filters
- Radius Configuration
- Reports
- Data Handling
- Data Clearance
- Show Information
- Remove Configuration
- Help
- Appendix A: Quick Reference Guide
- Appendix B: Technical Support
- Glossary of Terms
- Index
Wireless LAN Array
150 The Command Line Interface
ssid-brdcst
ssid-manager
vlan
DNS Configuration
The following keywords are used for establishing the DNS parameters.
dns
domain
Description: Specify if you want to broadcast this SSID
Usage: ssid-manager { ssid <ss> { ssid-brdcst <sb> }}
Parameters: <ss> specifies the SSID, up to 32 characters
<sb> specifies if you want to broadcast this SSID, either 0 or 1,
where:
0 = No, 1 = Yes
Description: Set up SSID for a specific radio or the complete system
Usage: ssid-manager { ssid <ss> { add }
Parameters: <ss> specifies the SSID, up to 32 characters
Description: Define a VLAN ID associated with this SSID
Usage: ssid-manager { ssid <ss> { vlan <sv> }}
Parameters: <sv> identifies the VLAN for this SSID
Description: Configure DNS settings
Usage: dns { hostname <hname> }
Parameters: <hname> specifies the host name
Description: Enter your domain name
Usage: dns { domain <dom> }
Parameters: <dom> specifies your domain name, for example:
www.mydomain.com