User's Manual
Table Of Contents
- XS-3900 User’s Guide
- Front Matter
- Table of Contents
- List of Figures
- Introduction
- Installing the XS-3900
- Installation Prerequisites
- Planning Your Installation
- Installation Workflow
- Unpacking the XS-3900
- Installing the XS-3900
- Powering Up the XS-3900
- Establishing Communication with the Array
- Performing the Express Setup Procedure
- The Web Management Interface
- Configuring the XS-3900
- Logging In
- Making Configuration Changes to the XS-3900
- Array Status
- Express Setup
- Network Interfaces
- IAP Interfaces
- SSID Management
- Security
- Users
- Services
- Software
- Tools
- Event Log
- The Command Line Interface
- Establishing a Secure Shell (SSH) Connection
- Basic Commands
- Command Modes
- Selecting Interfaces
- Command Line Keywords
- Interface Selection
- Interface Configuration
- Radio Configuration
- Beacon Information
- System Administration
- System Testing
- Security
- Station Timeouts
- SSID Configuration
- DNS Configuration
- NTP Configuration
- DHCP Configuration
- Syslog Configuration
- SNMP Configuration
- Filters
- Radius Configuration
- Reports
- Data Handling
- Data Clearance
- Show Information
- Remove Configuration
- Help
- Appendix A: Quick Reference Guide
- Appendix B: Technical Support
- Glossary of Terms
- Index
Wireless LAN Array
The Command Line Interface 151
hostname
server1
server2
server3
NTP Configuration
The following keywords are used for establishing the NTP parameters.
disable
enable
Description: Enter your host name
Usage: dns { hostname <hname> }
Parameters: <hname> specifies the host name
Description: Enter the primary DNS server
Usage: dns { server1 <srv1> }
Parameters: <srv1> specifies the primary DNS server
Description: Enter the primary DNS server
Usage: dns { server2 <srv2> }
Parameters: <srv2> specifies the secondary DNS server
Description: Enter the tertiary DNS server
Usage: dns { server3 <srv3> }
Parameters: <srv3> specifies the tertiary DNS server
Description: Disable NTP services
Usage: ntp { disable }
Parameters: none
Description: Enable NTP services
Usage: ntp { enable }
Parameters: none