User's Manual
Table Of Contents
- XS-3900 User’s Guide
- Front Matter
- Table of Contents
- List of Figures
- Introduction
- Installing the XS-3900
- Installation Prerequisites
- Planning Your Installation
- Installation Workflow
- Unpacking the XS-3900
- Installing the XS-3900
- Powering Up the XS-3900
- Establishing Communication with the Array
- Performing the Express Setup Procedure
- The Web Management Interface
- Configuring the XS-3900
- Logging In
- Making Configuration Changes to the XS-3900
- Array Status
- Express Setup
- Network Interfaces
- IAP Interfaces
- SSID Management
- Security
- Users
- Services
- Software
- Tools
- Event Log
- The Command Line Interface
- Establishing a Secure Shell (SSH) Connection
- Basic Commands
- Command Modes
- Selecting Interfaces
- Command Line Keywords
- Interface Selection
- Interface Configuration
- Radio Configuration
- Beacon Information
- System Administration
- System Testing
- Security
- Station Timeouts
- SSID Configuration
- DNS Configuration
- NTP Configuration
- DHCP Configuration
- Syslog Configuration
- SNMP Configuration
- Filters
- Radius Configuration
- Reports
- Data Handling
- Data Clearance
- Show Information
- Remove Configuration
- Help
- Appendix A: Quick Reference Guide
- Appendix B: Technical Support
- Glossary of Terms
- Index
Wireless LAN Array
The Command Line Interface 157
Radius Configuration
The following keywords are used for configuring Radius services.
client-timeout
configure
dot1x
radius
radius-ip
radius-port
Description: Define 802.1x reply time from a client station
Usage: radius { radius-server { dot1x { client-timeout <cto1x> }}}
Parameters: <cto1x> specifies the time (in seconds) waiting for a client
station 802.1x reply before timing out
Description: Configure Radius server parameters
Usage: radius { radius-server { configure { radius-ip <radip> }}}
Parameters: <radip> specifies the IP address of the Radius server
Description: Define 802.1x client (STA) settings
Usage: radius { radius-server { configure { dot1x }}}
Parameters: none
Description: Configure Radius services
Usage: radius { radius-server { configure { radius-ip <radip> }}}
Parameters: <radip> specifies the IP address of the Radius server
Description: Define the Radius server IP address
Usage: radius { radius-server { configure { radius-ip <radip> }}}
Parameters: <radip> specifies the IP address of the Radius server
Description: Define the Radius authentication port
Usage: radius { radius-server { configure { radius-port <radport> }}}
Parameters: <radport> specifies the Radius authentication port